3D Standard Funkset 12K VRTR02-12 besteht aus: Sender VTR02-12K, Empfänger VRT02-12K, 2x Stabantenne VAP02, 2x Richtantenne VAK02, 2x Netzteil VC20114S. Das Sender-/Empfänger Funk-Set arbeitet im 2,4 GHz-Bereich mit einer Sendeleistung von 10mW. Die max. Reichweite beträgt ca. 100m mit Stabantennen und ca. 2.000m mit Richtantennen. Bei jedem Sender (Transmitter) und Empfänger (Receiver) sind über Mikro-Switch 4 verschiedene Kanäle schaltbar. Es könnten gleichzeitig bis zu 4 Funkstrecken betrieben werden. Empfänger mit automatischer (Sequenzer 1-2 Sek.) und manueller Kanal-Umschaltung. Das Funksignal mit einer Wellenlänge von ca. 130mm dringt durch Mauern und nicht metallische Hindernisse mit unterschiedlicher Absorbierung bzw. Reflektion. Wir raten deshalb zu einem Testbetrieb vor einer endgültigen Montage. Die mitgelieferten Richt-Antennen müssen parallel zueinander ausgerichtet sein, der Antennen-Anschluß erfolgt über ein Koax-SAT-Kabel (mögl. kurz, max. 15m) mit F-Steckern (otional).

The transmitter is used for wireless audio and video transmission at frequencies 2.400-2.4835 GHz. It has video and audio baseband inputs (RCA sockets). A VCR, DVD player, receiver, camera or other devices can be plugged into the inputs. The audio path is stereo, two RCA sockets are used to connect left and right channel signals. The transmitter is powered by 12V 500mA DC. Due to a limited bandwidth allowed by the rules for such purposes the maximum number of channels, limiting also maximum number of transmitters working simultaneously is 4. A special micro-switch is used for changing between 4 available channels. Additional, this kind of transmitter has 8 channels (UP, DOWN). TR02-12k has admitted for application in cauntries about different that Poland regulation by law.There is also a possibility of manual adjustment of contrast.

The receiver is used for converting the signal from coming from a transmitter to AV signals. It works at the 2.4 GHz frequency band and is prepared to work together with the transmitter. It is four-channel receiver of the A/V signals with built-in sequence switch. Any channel can be easily selected with the aid of the switch marked CH and the selection is signaled by one of the four LED diodes placed next to the channels numbers, or by automatic selection (change time 1-2 sec). Additional, this kind of reciver has 8 channels (UP, DOWN). RT02-12k has admitted for application in cauntries about different that Poland regulation by law. The receiver has both video and audio outputs. TV receivers and VCRs or DVD recorders can be plugged via the RCA type of sockets. Two sockets are employed for audio signal (left and right channel).


TECHNICAL DATE VTR02

Channel 1 2 3 4
Frequency /MHz/ 2414 2432 2450 2468
Choice of mode of work Mode sequence / choice (manual)
Power supply = 10mW / 50O
Modulation FM - CCIR 405
Sensitivity 80 dB
Input AUDIO 1.4k Ohm
Input VIDEO 75 Ohm
Output antenna Socket SMA 50 Ohm
Power supply 8 bis 16V DC
Working temperature -20 bis +40°C
Measure 145 x 80 x 25 mm


TECHNICAL DATA VRT02

Channel 1 2 3 4
Frequency /MHz/ 2414 2432 2450 2468
Choice of mode of work Mode sequence / choice (manual)
Modulation FM - CCIR 405
Sensitivity 80 dB
Output AUDIO 1.4k Ohm, VIDEO 75 Ohm
Input antenna Socket SMA - 50 Ohm
Power supply 8 bis 16V DC
Working temperature -20 bis +70 °C
Measure 184 x 80 x 25 mm


TECHNICAL DATA Antenna small VAP02

Energetics profit 3 dB
Frequency 2400-2500 MHz
Polarization Horizontal
Horizontal angle radiaton 369 degrees
Vertical angle radiaton 60 degrees
Socket SMA
Measure 9 x 90 mm


TECHNICAL DATA Antenna Direction VAK02

Energetics profit 8 dB
Frequency 2400-2500 MHz
Polarization Horizontal or vertical
Horizontal angle radiaton 120 degrees
Vertical angle radiaton 66 degrees
Impedance 50 Ohm / 75 Ohm
Cable connectting RG 58 U / CTF 113
Socket in cable Socket SMA lub F
Socket in antenna Socket SMA lub F
Measure 120 x 70 x 26 mm


VCvision Typ. VC20114S, elektronisch stabilisiertes Steckernetzteil für 100 bis 240VAC zum Anschluß von Sender u. Empfänger. Leistung 12V/1300mA (15,6W). Euro-Netzstecker und ca.1,5m Anschlußkabel mit DC-Hohlstecker. VDE-Zulassung. Schutzart IP40.